23
settings.
Reset
Click
Reset
to restore to default values.
Virtual Server
Enable Virtual Servers
Check to enable virtual server function.
Servers
You can set up a local server with specific port number that
stands for the service (e.g. web (80), FTP (21), Telnet (23)).
When this device receives an incoming access request for
this specific port, it will be forwarded to the corresponding
internal server. You can add virtual servers by either port
numbers or by names.
Maximum 24 Server entries are allowed and each port
number can only be assigned to one IP address.
Local IP Address
Enter the Local Server’s IP address.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system
or service.
Port Range
For TCP and UDP Services, enter the beginning of the range of
port numbers used by the service. If the service uses a single port
number, enter it in both the start and finish fields.
Description
You may key in a description for the local IP address.
Save
After completing the settings on this page, click
Save
to save the
settings.
Reset
Click
Reset
to restore to default values.
