- 14 -
Installation for Windows NT 4.0
This section describes the installation for
Windows NT under the condition that Windows
NT is already installed in your computer. If your
computer is not yet networking installed, refer to
the Windows documentation for details. Also
remember to have your original Windows NT
CD-ROM handy before you begin the installation.
For Windows NT may ask for it during the
installation.
1. Before you turn on your computer, make
sure the
PCMCIA Fast Ethernet PC Card
has been properly inserted into the free
PCMCIA slot of your computer.
2. Start Windows NT.
3. Click
Star
t
Settings Control Pane
l.
Double-click on the
Network
icon.
4. When the Network window appears, click on
the
Adapters
tab. Click on the
Add
button,
followed by
Have Disk
. Put the driver disk
into drive A.
5. When asked to supply the path to the disk,
type a:\ and click
OK
.
6. Windows NT will ask you to supply the I/O
Base, Interrupt, and Memory values for the
card. Good values to start with are 300 (for
the I/O Base) and 5 (for the IRQ).
7. When you're finished, click
OK
. Windows
NT will copy necessary files to your
computer.
