0010456_A1
ABNOX Temperature Controller AXTR-xxxxxx-xxxxx
Page 69 of 84
Entering values
When entering values in the actual levels, the lower display shows you the symbol of the parameter,
(1) Select parameter (lower display lights
up - green)
(2) Change value (upper display lights up -
red)
(3) Parameter blinking
Entering times
Time values are displayed with a decimal point in the middle and to the right. Time units can be configured.
(1) Select parameter (lower display lights
up - green)
(2) Change value (upper display lights up -
red)
(3) Parameter blinking
Procedure
1.
Select parameter with button (B) or (C)
2.
Change into entering mode with button (A): lower display is blinking.
3.
Change value with button (B) or (C). The longer you press the button, the faster the value changes,
4.
Accept settings with button (A) (will be automatically saved after 2 [s] ) - or use button (D) for cancel-
ing input (value will not be saved)
0
Pd 1
1
PD 1
(C)
(B)
(A)
(1)
(3)
(2)
(B)
(C)
88.88.
tO
00.28.
tO
(C)
(B)
(A)
(1)
(3)
(B)
(C)
