Installation manual Superbike
™
for Kawasaki ZX-10 R model 2016-
• Revision: 00 • 30/01/2020 •
© ABM Fahrzeugtechnik GmbH
Page 6 of 19
Mount the provided brake line to the
manifold, align as per the original and
fasten.
Put some grease onto the sealing, insert it into
the manifold and install the original steel
cable.
Tightening torque 18 Nm
Attach the manifold to the bracket with the
screw and nut provided.
For this, slightly bend the holder.
Tip: For this release the holder.
Caution: To ensure a tension-free installation,
the brake line fittings can be aligned once at
the crimping.
Release the bracket and remove the screw.
Attach the steering stop and the bracket to the
frame using the screw, safety washers
provided.
Use thread-locking fluid (medium strength).
In doing so, push the steering stop completely
forwards in the direction of travel.
Tightening torque 6 Nm