ABM
MOUNTING TIPS & FAQ
Quick Guide
5400
MOUNTING TIPS & FAQ
5400
11
!
We use a very sharp knife edge which
adapts to the profile of the moun ng bolt
in the first few weeks. Please do not be
surprised if semicircular notches appear on
the bolt support area of the knife edge.
That is the way to achieve a perfect joint.
The
knife edge
itself is posi oned and
secured in the slot by two grub screws
which are located on the underside of the
tremolo plate.
For this purpose, the screws have a conical
p which lateral surface presses the knife
edge into the slot when the screw is
screwed in.
A er the first resistance when ghtening,
con nue turning for a max. of 5-10 minutes
(compared with a clock face).
It is not about screwing the screws in over
the en re height of the base plate. This is
not even possible due to the mechanism.
When adjus ng the intona on, it is best to
use a long-bladed screwdriver so that we
do not damage the varnish of the guitar.
During this maintenance work, we
recommend covering the area below the
intona on screws with a cover for
protec on. Please always losen both saddle
locking screws prior to intona on se ngs.
For saddle height adjustments please
always loosen the frontsided saddle insert
locking screw before, so that the saddle
insert can be freely adjusted in height.
