Installation manual
Superbike
™
for Kawasaki Ninja H2 SX 2018-
• Revision: 00 • 13/02/2019 •
© ABM Fahrzeugtechnik GmbH
Page 8 of 8
After completing the work, the firm fit, function and tightness of all components and screws
must be checked. Make sure that there is sufficient brake fluid in the reservoir. Also check the
front wheel's freewheel and the functionality of the brake system. Further, the function of
the clutch, the throttle grip, the electric system and the anti-theft devices must be checked.
Afterwards, a test drive must be done! After completion of the test drive, all screw
connections must be re-checked for firm fit, tightness and all movable parts for adequate
freedom of movement. Re-test the front wheel's freewheel and check the brake system for
overheating. Check the brake fluid level in the reservoir for significant changes.
After approx. 100 km, the firm fit of all screw connections of the handlebar must be re-
checked against the specified tension values.
