INSTALLATION
4
Extension piece
Note!
6
Inspect the swing door operator against transport damage.
Test the free swinging of the door, which should open and close smoothly.
The automatic swing door operator is to be installed on the transom, with the
mains switch located towards the hinge.
For
, the door operator is mounted on the stop side of the door
installing the standard arm 7281 or 7282.
For
, the door operator is mounted on the hinge side of the door
installing the sliding arm 7611.
Use extension pieces for non standard applications. Maximum extension
shaft length 60 mm. Extension shafts: 10 mm, 20 mm, 60 mm.
push function
pull function
Mount a door stop to the door open position so that wind will not drive the
door against the wall, resulting in damage.
The door stop can be either floor or wall mounted.
DOOR SIZE/DOOR WEIGHTS
Standard arm
7281, 7282 for
push function
Sliding arm
7611 for pull
function
Door width max. 1 m ...
max. 125 kg
Door width max. 1.15 m ... max. 100 kg
Door width max. 1.3 m ... max. 90 kg
Door width max. 1 m ...
max. 80 kg
Door width max. 1.15 m ... max. 70 kg
Door width max. 1.3 m ... max. 60 kg
Sliding arm 7611
Standard arm 7281, 7282
When specifying, please take account of door surroundings
and exposure to weather conditions