Ablerex KRONOS, Installation And Operation Manual, Page: 61 / 72

59
The UPS parameters that can be modified by the user using the control panel are listed in the
table below.
Parameters Content Range Default
Battery
Independent/Common Ind. / Common Common
Total cell number 96 ~ 120 120
Capacity 1~1000 88
Voltage Temperature compensation Yes / No No
Detect the Battery connecting Yes / No Yes
Charger current 0.0~1.0 0.1
CV Charger voltage [V/cell] 2.000~2.550 2.300
FV Charger voltage [V/cell] 2.000~2.550 2.250
Vbatt. Low [V/cell] 1.850 ~ 1.883 1.850
Vbatt. Min [V/cell] 1.600 ~ 1.900 1.670
Battery test 2 minutes Yes / No Yes
Output
Output voltage
115
、
120
、
127
120
Output frequency 50
、
60 50
Fine adjustment voltage -8 ~ 8 0
Transformer
Input transformer No / Mains & Bypass No
Input transformer ratio
(1)
0.00~10.00 0
Output transformer No / Yes No
Output transformer ratio
(1)
0.00~10.00 0
Other
Unit number 1 ~ 6 1
Number of units in parallel system 1 ~ 6 1
Set EPO logic NO/NC NO
(1) Transformer ratios can be calculated as following,
Input transformer ratio = Vp_in/Vs_in; Output transformer ratio = Vs_out/Vp_out
UPS
Vp_in Vs_in Vp_out Vs_out
Input
Transformer
Output
Transformer