17
left-hand figure, you may press
key and the right-hand figure, you may
press
key.
Step3: The range of the total input power can be selected from 0~999K KWH. Once the
figure is selected, you may press
key to save. Make sure the “SAVE”
shown on the screen, then you may release
key now. When “SAVE”
disappears on the screen, it means your “save” is done successfully.
Step4:
You may escape from this setting by pressing
key
2.1.9 Parameters Displayed
Step1: After turning on the PV charger, it will display current solar cells
’
voltage. If
you would like to see other parameters, you may press
key or
key.
Step2: The LCD can show the following data, such as the voltage of the solar cells, the
input voltage/current of the solar cells, the input power of the solar cells, battery
voltage/current, Battery Capacity set(AH), charger temperature and battery
temperature.
Caution:
keys are of no use.
2.2 LCD Display Explanations
Display
Description
Input Voltage from Solar Cells
Input Current from Solar Cells
Input Power from Solar Cells
Total Input Power of the solar
Cells
Summary of Contents for Buck 1000W
Page 1: ...Photovoltaic Charger User s Manual Buck 1000W 1500W 12 24 36 48 Vdc...
Page 22: ...22...
Page 23: ...23...
Page 24: ...24 192321452000000...
