manualshive.com logo in svg

ABLELink EW5302, User Manual

The ABLELink EW5302 is a cutting-edge device that simplifies daily living for individuals with disabilities. Our user manual provides detailed instructions on how to utilize its features effectively. Download the comprehensive manual for free from our website, empowering users to maximize their experience with the ABLELink EW5302.

Share
Download
background image

User manual Version 1.0

 

EW5302 Wireless Serial Server

 

 

Copyright © 2007 Atop Technologies, Inc. 

All rights reserved. Designed in Taiwan

   

- 3 - 

2.4. Installation Procedures 

 

Prepare necessary cables, DC power adaptor and RS-232/RS-485 connector. 

 

Place EW5302 under the access point signal coverage area, or connect EW5302 to Ethernet 
cable with RJ45 connector. 

 

Connect EW5302 serial port to a Serial device. Please make sure the connector and wiring of 
RS-232 or RS-485 is correct. 

 

Plug in EW5302 to DC-9-48V power source (with DC-jack or 3-pin terminal bock connector), 
buzzer will beep and the RUN LED will blink if EW5302 functions normally. For LED Status see 
Appendix D.4 

Use 

SerialManager

 configuration utility on the Product CD to check the status of EW5302. If it starts up 

successfully, users shall find the IP and MAC addresses of EW5302. Users can also change IP address, 
gateway IP address and subnet mask networking parameters of EW5302 according to user networking 
configurations. 

Summary of Contents for EW5302






















































Reviews:

No comments

Related manuals for EW5302

NEC N8104-7132 Quick Start Manual preview
N8104-7132
Brand: NEC Pages: 7
Amped Wireless UA600EX Setup Instruction Manual preview
UA600EX
Brand: Amped Wireless Pages: 2
TDK HHM Series HHM2208SB1 Specifications preview
HHM Series HHM2208SB1
Brand: TDK Pages: 2
Lenze E84DZMAWE1 Mounting Instructions preview
E84DZMAWE1
Brand: Lenze Pages: 6
Dell HBA350i MX User Manual preview
HBA350i MX
Brand: Dell Pages: 49
Dell EtherExpress Pro/10+ Quick Manual preview
EtherExpress Pro/10+
Brand: Dell Pages: 16
Dell DA300 User Manual preview
DA300
Brand: Dell Pages: 17
Dell Wireless 1390 Getting Started preview
Wireless 1390
Brand: Dell Pages: 11
Dell QLogic QL45212 User Manual preview
QLogic QL45212
Brand: Dell Pages: 101
Dell DA100 User Manual preview
DA100
Brand: Dell Pages: 10
Dell Latitude E6400 XFR (Spanish) Manual De Servicio preview
Latitude E6400 XFR
Brand: Dell Pages: 74
Dell TrueMobile 1300 Owner'S Manual preview
TrueMobile 1300
Brand: Dell Pages: 142
Dell Latitude E6400 XFR Service Manual preview
Latitude E6400 XFR
Brand: Dell Pages: 81
Dell PowerVault MD3000 Hardware Owner'S Manual preview
PowerVault MD3000
Brand: Dell Pages: 102
Dell 65-W AC/DC User Manual preview
65-W AC/DC
Brand: Dell Pages: 92
Dell Qlogic QME8242 User Manual preview
Qlogic QME8242
Brand: Dell Pages: 178
ETAS XETK-S30.0 User Manual preview
XETK-S30.0
Brand: ETAS Pages: 57
Asante 10 Base-TX Quick Installation Manual preview
10 Base-TX
Brand: Asante Pages: 2

Brands by name

Popular brands

Load more brands