User manual Version 1.0
EW5302 Wireless Serial Server
Copyright © 2007 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 28 -
Fig. 39. Detailed Setting of Serial/IP Control Panel
Configure Virtual COM Ports
To configure Virtual COM port as shown in Fig. 39, it can be configured as follows.
Select a COM port on the list.
Check “Connected to Server” and enter the EW5302 IP address in “IP Address” field.
In the “Port Number” field, enter the TCP port number of the EW5302. The default port is 4660.
By default, “User Credentials” is not required. However, if it does require, you will need a
username and password to access EW5302 device.
Click “Configuration Wizard” to pop up a dialog to set up a configuration.
On “Username” and “Password”, the default is no login required. If the EW5302 does require the
login, you must provide a username and password to access the EW5302 device.
Click the “Start” button that shall appear on the wizard window. This step verifies that the Virtual
COM Redirector communicates with the EW5302. If “Log” display does not show any error, click
“Use Settings” to apply the settings and return to the Control Panel.
Settings on the “Connection Protocol” must match the TCP/IP protocol supported by the
EW5302. The Configuration Wizard is capable of determining the correct settings.
On “COM Port Options”, the settings must match the COM port behavior expected by the PC
application. The Configuration Wizard will recommend such settings.
