background image

 

Play all names

 
Whenever needed, you can hear all the names stored by following these steps: 

 

A.  Pick up the handset. The AP-7000 asks for a name to call, press the ‘#’ key. The main 

menu will be played. 

 

B. 

Press the ‘4’ key. The AP-7000 will playback all the stored names. Press the ‘#’ key or 
hang up to finish the playback.

 

 

FAQ (Frequently Asked Questions) 

 
The following is a list of the most common questions and problems encountered when using the AP-7000. 
If you cannot find a solution to your problem here, please contact us. 
 

Question

: why when i try and train a new name into the AP-7000, i keep hearing ‘please repeat’ and the 

name will not train? 
 

Answer

: this symptom usually has two main reasons for occurring: 

 

1.  You are trying to train the name while background noise is present. This can be any noise 

emitted from other people speaking in the room with you, a TV or radio working in the same 
room or even loud noises coming from construction works taking place near your home. As 
mentioned before, you should try and train names in a quiet environment. 

 
2.  You are not repeating the name correctly. Try and sound the same when you say the name 

for the first and second time. 

 
 

Question:

 why when I try to dial a name or to erase a name, the AP-7000 says “name not recognized”? 

 

Answer:

 assuming you have trained this name in a quiet environment as mentioned above, this is usually 

because you are pronouncing the name in a very different way from the way it is stored in memory. To 
listen to a playback of the name, use key ‘4’ while in the main menu (please refer to part 2 of this manual 
for exact instructions) 
 

Question

: i have only trained 48 names and when i try and train the next name, the AP-7000 says 

“memory full”. Why is that? 
 

Answer:

 the AP-7000 does have the capability of storing 60 names. However, if most of the names you 

have trained are very long (2-2.5 seconds), the memory will be filled earlier. Our recommendation is to 
use names with a 1 – 2 seconds length. This is the time normally needed to say even a long name, like 
‘George W. Bush’. In this manner, you will be able to reach the 60 names capacity with ease. 
 

Important note: 

 
The Ablephone AP-7000 

does not have a backup battery!

 

 
An uninterruptable power supply (ups) can be purchased from places like Costco, Sam’s Club, fry 
electronics, Radio Shack, Circuit City, Staples, etc.  These units are used to provide backup power to a 
computer.  The smallest of these units will power the AP-7000. 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for AP-7000 VC











Reviews: