background image

 

Erasing all names

 
Warning: erasing all names is an irreversible operation. Use it with care! 

 

A.  Pick up the handset. The AP-7000 asks you for a name to call. Press the ‘#’ key. The 

main menu will be played. 

 
B.  Press the ‘3’ key. The AP-7000 will prompt a warning message. 
 
C.  Pressing the ‘9’ key will confirm the eraser. Any other action (for example: hanging up) at 

this stage besides pressing the ‘9’ button will cause the names not to be erased. 

 

D. 

Press the '9' button. All the names will be erased; a 'memory empty' prompt will be heard 
and the phone will go back to the main menu.

 

 
Erasing a single name: 
 

Erasing a single name from memory can be accomplished in two separate ways, as described below:

 

 
Method 1: 

 

A.  Pick up the handset. The AP-7000 asks for a name to call, press the ‘#’ key. The main 

menu will be played. 

 
B.  Press the ‘2’ key. The AP-7000 asks for a name to erase. Say the name you wish to 

erase.  

 
C.  If the name is found, the AP-7000 asks you to confirm the eraser of the name by pressing 

the ‘5’ key. Any other action (for example: hanging up) at this stage besides pressing the 
‘5’ button will cause the name not to be erased. 

 

D.  Press the '5' button. The name will be erased and the AP-7000 will go back to the main 

menu. If this was the last name in memory, a 'memory empty' prompt will also be heard. 

 

Method 2: 

 

a.  Pick up the handset. The AP-7000 asks for a name to call, press the ‘#’ key. The main 

menu will be played. 
 

b.  Press the ‘4’ key. The AP-7000 will start playing back the names it has stored in its 

memory.  
 

c.  When you here the name you wish to erase, press any of the phone keys, except the # 

key. The AP-7000 asks you to confirm the eraser of the name by pressing the ‘5’ key. 
Any other action (for example: hanging up) at this stage besides pressing the ‘5’ button 
will cause the name not to be erased. 

 
d.  Press the '5' button. The name will be erased and the AP-7000 will go back to the playing 

back the names. If this was the last name in memory, a 'memory empty' prompt will also 
be heard. 

 
 
 
 
 
 
 
 
 

 

Summary of Contents for AP-7000 VC











Reviews: