Wallbox eMH3 –
Testing the RCCB |
27
English
y
Should the error persist, please contact a qualified specialist electrical contractor to resolve the
error.
y
Should the wallbox have to be replaced, please contact the dealer from whom you have purchased
your wallbox.
Description
The green and blue LEDS of the charge point are continuously ON while the red LED is OFF.
Cause and suggested solution
Die Wallbox eMH3 has been deactivated and the charging procedure cannot be initiated.
y
Contact a qualified specialist electrical contractor to have the wallbox checked.
y
Should the wallbox have to be replaced, please contact the dealer from whom you have purchased
your wallbox.
Description
The LEDs of the wallbox are not functioning.
Cause and suggested solution
The wallbox is not connected to the electricity grid.
y
Check the internal RCCB(s) and switch it (them) back on if required.
y
Check the upstream circuit breaker in your domestic power distribution and switch it back on if
required.
y
Have a qualified specialist electrical contractor check the power supply cable and restore it if
required.
The wallbox is defective.
y
Please contact a qualified specialist electrical contractor to have the error resolved.
y
Should the wallbox have to be replaced, please contact the dealer from whom you have purchased
your wallbox.
Testing the RCCB
To ensure the continuing safe operation of the wallbox, you must test the function of the RCCB (Twin
wallboxes: both RCCBs) according to locally applicable regulations (e.g. every 6 months in Germany): For
this purpose, the RCCB has a push button with which to initiate the test function.
Proceed as follows to test the RCCB:
1
Open the housing cover of the wallbox using
the triangular key and lower it.
