Assembly
oPerAtIon
7
Operation
Charging process and LED indicators (Fig. F)
The charging process complies with IEC 61851-1 Mode 3
Step
LED F2
(green)
LED F1
(blue)
Description
Ready
Off
short flash
every 5 s
Power supply
connected to the
vehicle inlet
Off
On
Vehicle detected, charging starts
automatically
Charging
flashing
On
Green LED is flashing
Charging stopped
by vehicle1)
On
On
Remove charging cable from the
vehicle and place it back in the
charging station
Error2)
Flashing sequence F1 x 1,
F2 x 3
•
The vehicle is requesting
additional ventilation during
the charging process
•
Charging is not taking place
•
Charging process will auto-
matically restart after 30 s
Error2)
F1 and F2 are flashing
alternately
•
Communication with vehicle
disrupted
•
Charging is not taking place
•
Charging process will auto-
matically restart after 30 s
1) The charging process can also be stopped by removing the charging cable from the
vehicle
2) The flashing sequence is repeated continuously
Summary of Contents for eMH1 513
