BIOS Setup
3-15
3.2.4.
Power Management Setup
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1 (PowerOn-Suspend)]:
Enables the Power On Suspend function.
[S3 (Suspend-To-RAM)]:
Enables the Suspend to RAM function.
Power Button Function
This item selects the method of powering off your system:
[Delay 4 Sec.]:
Pushing the power button for more than 4 seconds will power off the
system. This will prevent the system from powering off in case you accidentally hit or
pushed the power button.
[Instant-Off]:
Pressing and then releasing the power button at once will immediately
power off the system.
Wake-Up by PME# of PCI
When set to [Enabled], access to the onboard LAN or a PCI card such as a modem or
LAN card will cause the system to wake up. The PCI card must support the wake up
function.
User’s Manual
Summary of Contents for SU-2S
Page 1: ...SU 2S Dual Opteron Server Board Socket 940 User s Manual Rev 1 00...
Page 7: ...Introduction 1 3 1 2 Layout Diagram User s Manual...
Page 24: ...2 16 Chapter 2 2 3 13 Low Pin Count Connection Header LPC Reserved for internal testing SU 2S...
