Introduction to SILURO
™
GF2 MX
2-1
User’s Manual
Chapter 2.
Hardware Installation
This section tells you how to make a quick connection to the SILURO
™
GF2 MX series Graphics
Accelerator.
2-1.
Card Layout
Figure 2-1. Card Layout of GF2 MX Graphics Accelerator
2-2.
Card Installation
Turn off the PC and all external peripherals connected to it (e.g. printer…etc.), then remove the PC
system cover.
Remove the metal bracket corresponding to the AGP slot. Save the screw.
Align the SILURO
™
GF2 MX Graphics Accelerator to the AGP slot. Hold it by its edges and insert the
card into the slot without using excessive force or pressing any components on the video card. Make sure
it is firmly and completely fixed into the slot.
Secure the SILURO
™
GF2 MX Graphics Accelerator to the AGP slot. Align the notch in the mounting
bracket of the video card with the screw hole in the rear panel of the computer case. Use the screw that
you had removed from the metal bracket to secure it in place.
Replace the system cover. You are now ready to boot up your PC system.
