Abit SI-1NS User Manual Download Page 45

Page: 45 / 48

How to Get Technical Support

A-3

North America and South America:

ABIT Computer (U.S.A.) Corporation

45531 Northport Loop West,
Fremont, California 94538, U.S.A.
Tel: 1-510-623-0500
Fax: 1-510-623-1092

[email protected]

http://www.abit-usa.com

U.K. and Ireland:

ABIT Computer (U.K.) Corporation Ltd.

Unit 3, 24-26 Boulton Road,
Stevenage, Herts SG1 4QX, U.K.
Tel: 44-1438-228888
Fax: 44-1438-226333

[email protected]

Germany, Benelux (Belgium, Netherlands, Luxembourg),
Denmark, Norway, Sweden, Finland, and Switzerland:

AMOR Computer B.V. (ABIT’s European Office)

Van Coehoornstraat 7,
5916 PH Venlo, The Netherlands
Tel: 31-77-3204428
Fax: 31-77-3204420

[email protected]

http://www.abit.nl

Austria, Czech, Romania, Bulgaria, Yugoslavia, Slovakia,
Slovenia, Croatia, Bosnia, Serbia, and Macedonia:

Asguard Computer Ges.m.b.H

Schmalbachstrasse 5,
A-2201 Gerasdorf/Wien, Austria
Tel: 43-1-7346709
Fax: 43-1-7346713

[email protected]

User’s Manual

Summary of Contents for SI-1NS

















































Search results

Summary of Contents for SI-1NS

Reviews:

Related manuals for SI-1NS

Brands by name

Popular brands

Abit SI-1NS, User Manual

Search results

Summary of Contents for SI-1NS

Reviews:

Related manuals for SI-1NS

Brands by name

Popular brands