manualshive.com logo in svg

Abit SI-1NS, User Manual, Page: 27 / 48

Share
Download
Abit SI-1NS User Manual Download Page 27

BIOS Setup 

3-5 

3.2.  Advanced BIOS Features 

 

BIOS Protect Control 

This option protects for accidentally BIOS writing attempt. 

NOTE: 

Make sure to set this item to “Unprotected” when flashing the BIOS. 

CPU Hyper-Threading 

This option enables or disables the processor’s Hyper-Threading Technology. 

Leave this item to its default setting to enable the simultaneous multi-threaded (SMT) 
processor so as to make one physical processor looks like two logical processors to 
the OS and applications. 

This option is for CPU with Hyper-Threading Technology only. For more information 
on “Hyper-Threading Technology”, please visit Intel Web site at 

http://www.intel.com/homepage/land/hyperthreading.htm

 , 

http://www.intel.com/design/chipsets/ht/

. 

Quick Power On Self Test 

When set to [Enabled], this item speeds up the Power On Self Test (POST) after 
powering on the system. The BIOS shorten or skip some check during the POST. 

User’s Manual 

Summary of Contents for SI-1NS

















































Reviews:

No comments