Abit SD7-53 User Manual Download Page 21

Page: 21 / 90

Installing the Motherboard

User’s Manual

2-13

(11). 6CHAUD1 Header: 6 Channels Audio Header

You’ll see this header on SD7-533 motherboard. This header
is designed to connect the CA-20

(Optional)

. CA-20

(Optional)

can provide the analog audio output signals for

center channel, subwoofer, rear right and rear left channel. It
also provides one digital S/PDIF input and one digital S/PDIF
output connector.

Another two USB connectors on CA-20

(Optional)

are

provided for use for FPIO3 or FPIO4 headers. Please refer the
description of FPIO3 and FPIO4 on item (6).

Note:

Watch the pin position and the orientation

(12). FPAUD1 Header: Front Panel Audio Header

This header is reserved to transfer audio in/out
signals and plugs from back panel connectors to front
panel.

Summary of Contents for SD7-53



























































































Search results

Summary of Contents for SD7-53

Reviews:

Related manuals for SD7-53

Brands by name

Popular brands

Abit SD7-53, User Manual

Search results

Summary of Contents for SD7-53

Reviews:

Related manuals for SD7-53

Brands by name

Popular brands