[On]:
The numeric keypad functions as number keys.
[Off]:
The numeric keypad functions as arrow keys.
Security Option
This item determines when the system will prompt for password - every time the system boots
or only when it enters the BIOS setup.
[Setup]:
The password is required only when accessing the BIOS Setup.
[System]:
The password is required each time the computer boots up.
To disable security, select
Set Password
at main menu and then you will be asked to enter the
password. Do not type anything and just press the
<Enter>
key and it will disable security.
Once security is disabled, the system will boot and you can enter the
BIOS setup menu
freely.
※
Don’t forget your password. If you forget the password, you will have to open
the computer case and clear all information in the CMOS before you can start up
the system. But by doing this, you will have to reset all previously set options.
MPS Version Ctrl For OS
This item specifies which version of MPS (Multi-Processor Specification) this motherboard will
use. Leave this item at its default setting.
Delay For HDD (Secs)
This item allows the BIOS to support some old or special IDE devices by prolonging this delay
time. A larger value will give more delay time to the device for which to initialize and to prepare
for activation.
Full Screen LOGO Show
This item determines if the full screen logo is shown when booting.
3-8
NF-M2 nView
Summary of Contents for NF-M2 NVIEW
