Hardware Setup
NF-M2 nView
2-11
To install system memory:
1. Power off the computer and unplug the AC power cord before installing or removing
memory modules.
2. Locate the DIMM slot on the board.
3. Hold two edges of the DIMM module
carefully, keep away from touching its
connectors.
4. Align the notch key on the module with
the rib on the slot.
5. Firmly press the module into the slots
until the ejector tabs at both sides of the slot automatically snap into the mounting notch.
Do not force the DIMM module in with extra force as the DIMM module only fits in one
direction.
6. To remove the DIMM modules, push the two ejector tabs on the slot outward
simultaneously, and then pull out the DIMM module.
※
Static electricity can damage the electronic components of the computer or
optional boards. Before starting these procedures, ensure that you are
discharged of static electricity by touching a grounded metal object briefly.
2.5.3 PCI Express X16 Add-on Slot (For add-on graphics card)
This slot supports one PCI-Express X16 graphics card that complies with PCI Express
specifications. Insert your PCI-Express X16 graphics card into this slot.
Summary of Contents for NF-M2 NVIEW
