Abit KX7-333 User Manual Download Page 78

Page: 78 / 104

A-2

Appendix A

KX7-333/KX7-333R

Step 3:

You will now see the welcome screen

and its dialogue box. Click “

Next>

” to go on.

Step 4:

The service pack readme screen will

appear. Click the “

Yes

” button to go on.

Step 5:

You can choose “

Normally Install

” or

“

Quickly Install

” to install the VIA 4-in-1

drivers. If you choose “

Quickly Install

” mode,

this driver will automatically detect and install
the latest 4-in-1 drivers.

For users who are upgrading VIA Drivers, we
recommend installing the 4-in-1 using the

“

Quickly Install

” mode, as it will automatically

detect and update the necessary drivers. The
following step we will describe the “

Normally

Install

” mode procedure.

Step 6:

This setup program will install four kinds

of drivers. Please check which drivers you want
to install. When you choose the items, please
click the “

Next>

” button to continue.

(Windows

98 SE)

Step 6:

This setup program will install three

kinds of drivers. Please check which drivers you
want to install. When you choose the items,
please click the “

Next>

” button to continue.

(Windows

2000)

Summary of Contents for KX7-333









































































































Search results

Summary of Contents for KX7-333

Reviews:

Related manuals for KX7-333

Brands by name

Popular brands

Abit KX7-333, User Manual

Search results

Summary of Contents for KX7-333

Reviews:

Related manuals for KX7-333

Brands by name

Popular brands