background image

BIOS Setup 

3-13 

[278/IRQ5]:

 This option allows the parallel port to use [278

/

IRQ5] as its I/O port address. 

[3BC/IRQ7]:

 This option allows the parallel port to use [3BC

/

IRQ7] as its I/O port address. 

 

Parallel Port Mode: 

This item specifies the parallel port mode. 

[SPP]:

 (Standard Parallel Port) Allows bi-directional parallel port operation at normal speed. 

[EPP]:

 (Enhanced Parallel Port) Allows bi-directional parallel port operation at maximum speed. 

[ECP]:

 (Extended Capabilities Port) Allows bi-directional parallel port operation at a speed faster than 

the normal mode’s data transfer rate. 

[ECP+EPP]:

 Allows parallel port operation at ECP and EPP mode. 

[Normal]:

 Allows the standard parallel port mode to be used. 

 

EPP Mode Select: 

This item selects the EPP mode. 

 

ECP Mode Use DMA: 

This item selects the DMA channel of the parallel port. 

 

Back to Integrated Peripherals Setup Menu: 

Init Display First: 

This item selects to initialize AGP or PCI Slot first when the system boots. 

[PCI Slot]:

 When the system boots, it will first initialize PCI.

 

[AGP]: 

When the system boots, it will first initialize AGP. 

User’s Manual 

Summary of Contents for KV-80

















































Reviews: