Abit KN8 ULTRA User Manual Download Page 13

Page: 13 / 72

Hardware Setup

KN8 Ultra-SOTES, KN8 Ultra, KN8

2-5

2.3.2 Wake-up Headers

These headers use a jumper cap to enable/disable the wake-up function.

•

PS2-PWR1:

Pin 1-2 shorted (Default): Disable wake-up function support at Keyboard/Mouse port.
Pin 2-3 shorted: Enable wake-up function support at Keyboard/Mouse port.

•

USB-PWR1:

Pin 1-2 shorted: Disable wake-up function support at USB1 port.
Pin 2-3 shorted (Default): Enable wake-up function support at USB1 port.

•

USB-PWR2:

Pin 1-2 shorted: Disable wake-up function support at USB2 port.
Pin 2-3 shorted (Default): Enable wake-up function support at USB2 port.

•

FP-PWR1:

Pin 1-2 shorted: Disable wake-up function support at FP-USB1 port.
Pin 2-3 shorted (Default): Enable wake-up function support at FP-USB1 port.

•

FP-PWR2:

Pin 1-2 shorted: Disable wake-up function support at FP-USB2 port.
Pin 2-3 shorted (Default): Enable wake-up function support at FP-USB2 port.

•

FP-PWR3:

Pin 1-2 shorted: Disable wake-up function support at FP-USB3 port.
Pin 2-3 shorted (Default): Enable wake-up function support at FP-USB3 port.

Summary of Contents for KN8 ULTRA









































































Search results

Summary of Contents for KN8 ULTRA

Reviews:

Related manuals for KN8 ULTRA

Brands by name

Popular brands

Abit KN8 ULTRA, User Manual

Search results

Summary of Contents for KN8 ULTRA

Reviews:

Related manuals for KN8 ULTRA

Brands by name

Popular brands