Abit CX6 User Manual Download | Manualshive

Page: 91 / 114

background image

Installing HighPoint XStore Pro Utility

E-1

User’s Manual

Appendix E Installing the HighPoint XStore Pro

Utility

We provide a useful and powerful utility on our product package,

HighPoint XStore Pro

.

What does XStore do? The XStore Pro is a hard disk enhancement utility which improves
system performance. The basic concept is to use a read-ahead caching algorithm to improve
hard disk performance. With the market trend moving system’s standard configurations
towards 48 MBytes memory size or beyond, HighPoint’s XStore Pro provides higher system
performance. XStore Pro is the new generation of XStore MMX Accelerators for Storage.

XStore Pro utilizes the bigger system memory size to enhance memory management by
working with Windows

®

95 and 98. XStore Pro optimizes higher system performance by

read ahead caching after seeking with large block sizes of hard disks. And best of all, XStore
Pro supports several PCI Bus Master Controllers such as Intel, SiS, Ali, Via and others.

When you install XStore Pro, you can choose to install CD Xpress at the same time. Why do
you need CD Xpress? We’ll tell you more about it.

CD-ROM technology is growing fast, but its performance is still unacceptable compared to
today's hard drives. The transfer rates of today's hard drives can exceed 18MB/sec with
access times below 12ms. However, transfer rates for the fastest CD-ROM drives on the
market are below 2MB/sec with access times over 100 ms.

CD Xpress was created to accelerate the accessing speed of the CD-ROM drive by utilizing
the hard drive's high performance. CD Xpress reads and buffers data from the CD-ROM to
an area in the hard drive. With CD Xpress, when you access CD-ROM data, you are actually
accessing data from a swap file in the hard drive. This results in a tremendous increase in
CD-ROM performance without penalties.

Before you install this utility, there are several things you need to know.

Important Note

1. You can only install one Bus Master Driver at a time in your system, or the drivers will

result in conflict and cause system hangs. Please make sure you don’t have any Bus
Master Drivers installed in your system before you install XStore Pro! You must remove
all components of the previous Bus Master Driver before you install XStore Pro to your
system. For example, you cannot install both the Intel

®

bus master driver and HighPoint

XStore Pro in your system, otherwise it will cause system conflict when you install the
second bus master driver!

«
...
89
90
91
92
93
...
»

Summary of Contents for CX6



















































































































Reviews:

No comments

Related manuals for CX6

Brand: IBASE Technology Pages: 92

Brand: ST Pages: 24

Brand: ASROCK Pages: 221

PENTIUM PRO W6-LI

Brand: Micronics Pages: 82

LCD Programmer Module

Brand: Xtralis VESDA Pages: 54

Brand: ECS Pages: 92

Brand: Vox Technologies Pages: 36

Brand: DFI Pages: 46

Brand: AOpen Pages: 8

Brand: Safran Pages: 29

K10N750SLI-WIFI

Brand: ASROCK Pages: 264

Brand: MSI Pages: 126

Brand: Supero Pages: 121

Brand: AOpen Pages: 8

Brand: Supero Pages: 105

Brand: ADLINK Technology Pages: 67

G31M-GS R2.0-QVL

Brand: ASROCK Pages: 2

Brand: Intersil Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands