Abit CX6 User Manual Download | Manualshive

Page: 111 / 114

background image

How to Get Technical Support

I-1

User’s Manual

Appendix I

How to Get Technical Support

(From our website)

http://www.abit.com.tw

(In North America)

http://www.abit-usa.com

(In Europe)

http://www.abit.nl

Thank you for choosing ABIT products. ABIT sells all our products through distributors,
resellers and system integrators, we have no direct sales to end-users. Before sending email
for tech support please check with your resellers or integrators if you need any services, they
are the ones who sold you your system and they should know best as to what can be done,
how they serve you is a good reference for future purchases.

We appreciate every customer and would like to provide the best service to you. Providing
fast service to our customers is our top priority. However we receive many phone calls and a
huge amount of email from all over the world. At the present time it is impossible for us to
respond to every single inquiry. Therefore it is quite possible that if you send an email to us
that you may not receive a response.

We have done many compatibility tests and reliability tests to make sure our products have
the best quality and compatibility. In case you need service or technical support, please
understand the constraint we have and

always check with the reseller who sold the

product to you first.

To expedite service, we recommend that you follow the procedures outlined below before
contacting us. With your help, we can meet our commitment to provide the best service to
the

greatest number of ABIT customers:

1.

Check the Manual.

It sounds simple but we have taken a lot of care in making a

well written and thorough manual. It is full of information that doesn't only pertain to
motherboards. The CD-ROM included with your board will have the manual as well as
drivers. If you don't have either one go to our Program Download Area of the website or
FTP server at:

http://www.abit.com.tw/download/index.htm

2.

Download latest BIOS, software or drivers.

Please go to our Program

Download area on our website to check to see if you have the latest BIOS. They are
developed over periods of time to fix bugs or incompatibilities.

Also please make sure

you have the latest drivers from your peripheral cards makers!

3.

Check the ABIT Technical Terms Guide and FAQ on our website.

We are

trying to expand and make the FAQs more helpful and information rich. Let us know if
you have any suggestions. For hot topics check out our HOT FAQ!

«
...
109
110
111
112
113
...
»

Summary of Contents for CX6



















































































































Reviews:

No comments

Related manuals for CX6

Brand: Gigabyte Pages: 125

Brand: ZiLOG Pages: 41

Brand: Advantech Pages: 4

Brand: Quick Pages: 32

Brand: JETWAY Pages: 38

Brand: C-Control Pages: 8

Strata Enabled NCV6357

Brand: ON Semiconductor Pages: 6

Brand: IEI Technology Pages: 162

Brand: IEI Technology Pages: 162

Brand: MSI Pages: 164

Brand: DG Pages: 18

GA-8IP775 Series

Brand: Gigabyte Pages: 80

Brand: Gigabyte Pages: 80

Brand: ASROCK Pages: 2

Brand: Winmate Pages: 72

Brand: Boser Pages: 79

RouterBOARD 111

Brand: MikroTik Pages: 2

Brand: ASROCK Pages: 163

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands