Abit CX6 User Manual Download

Page: 85 / 114

Installing the Audio Drivers for the Windows

C-1

User’s Manual

Appendix C Installing the Audio Drivers for

the Windows

In this section we will show you how to install the audio drives to your Windows

NT 4.0

Server/Workstation operating system. All screen shot are from Windows

NT 4.0

Workstation version. Before you install the audio drivers, please install Windows

NT 4.0

Service Pack 4 (or the latest version) first. Then you can install the audio drivers.

First you need go to the "Control Panel" and
double click the item "Multimedia".

Choose the "Devices" folder then click the
"Add…" button.

Then choose the "Unlisted or Updated
Driver" and click the "OK" button.

NOTE

If you want to play a MIDI file in Windows NT, you have to install Soft Synthesizer S-
YXG50. You can find this software in the CX6 CD-ROM.

Summary of Contents for CX6



















































































































Search results

Summary of Contents for CX6

Reviews:

Related manuals for CX6

Brands by name

Popular brands

Abit CX6, User Manual

Search results

Summary of Contents for CX6

Reviews:

Related manuals for CX6

Brands by name

Popular brands