Abit BG7ML, User Manual

Page: 62 / 96

4-18 Chapter 4
CPU THRM-Throttling
This option is used during Suspend To RAM (STR) mode. It controls the CPU speed as a
percentage of regular power.
Wake-Up by PCI card(PME#):
This item allows you wake-up your computer by PCI devices. For instance, if you had
installed a PCI LAN card with Wake-Up on LAN capability, then you could wake-up your
computer from another computer via a network by sending a wake-up frame signal. This
feature also allows the PCI card built-in hardware function to support the wake up function
without special cables connected to the motherboard.
NOTE: This feature needs a specific network interface (optional). Also your ATX power
5V standby power must be at least 720mA compatible.
Power On by Ring:
Two options are available: Enabled and Disabled. Default setting is Disabled . If you connect
an external modem to the onboard serial port, the system will be turned on when a telephone
ring-up occurs.
Wake-Up by Onboard Lan:
This item allows to wake up the system through the onboard LAN.
Resume by Alarm:
Two options are available: Enabled and Disabled. Default setting is
Disabled
. The RTC alarm
can turn on the system. You can set Date (of month) and Time (hour, minute, and second)
when you set this item to
Enabled .
Reload Global Timer Events
When one of the specified events occur, the count down made for entry in power saving mode
goes back to zero. Since the computer will enter a power saving mode only after an inactivity
delay specified (time specific for Doze, Standby and Suspend modes) and after it has no
activity, during this time period, any event will cause the computer to re-count the time
elapsed. Resume events are operations or signals that cause the computer to resume time
counting.
Primary IDE 0 / Primary IDE 1:
Two options are available: Enabled and Disabled. The
default setting is Disabled . If any primary IDE master/slave I/O activity occurs, it will cause
the computer to re-count the time elapsed.
Secondary IDE 0 / Secondary IDE 1: Two options are available: Enabled and Disabled.
Default setting is Disabled . If any secondary IDE master/slave I/O activity occurs, it will
cause the computer to re-count the time elapsed.
BG7mL