D-2 Appendix
D
Explanation of parameter names:
/CC:
Clears CMOS data
/CP:
Clears PnP data
Remarks:
¬
When executing AWDFLASH.EXE, do not run HIMEM.SYS and
EMM386.EXE in the CONFIG.SYS.
-
Please take the following actions to solve problems caused by
power shortage or other other unpreventable malfunctions during
BIOS update that lead to update failure. First, it is strongly
suggested that you format a disk that can boot your computer
before you update your BIOS. If the above mentioned problem
occurs during BIOS update you will be able to use this disk to
automatically execute a BIOS update. The content of the disk
should be the following:
a. Startup system files (COMMAND.COM, MSDOS.SYS,
IO.SYS...)
b. AWDFLSH.EXE
c. The NEWBIOS file which can be downloaded from ABIT’s
website.
d. AUTOEXEC.BAT, which has the following content:
A:\AWDFLASH NEWBIOS /Py /Sn /CC .
®
When a version of BIOS that is for the incorrect mainboard
model the following message will appear:
“
The program file’s part number does not match with
your
system!
”
Summary of Contents for AT6
