Step 3
：
First put the power line(2) from top to the uprights assembly(9)
and the glass base assembly(12), pull out the power line plug
from the glass base; then insert the assembled massage head
assembly into upright(9), turn the elastic pin(21) to the upright
assembly(9), only to spin into 3-5 teeth, then a hand pull out
elastic pin(21), the other hand adjust the left and right and up
and down position of massage head assembly(1) to make one
of adjustment holes aim bolt hole, release the elastic(21) and
spin tight.
Step 4
：
Hang the massage belt(8) in the balanced wheel
of massage head assembly. Be noticed that the
massage belt must hang in the balanced wheel
before using it.
MASSAGE FUNCTION INSTRUCTION
1. Display:
(1) Program Display:
„P-01” — „P-05”
(2) Compound Display
Displays (Calories
、
Temps
、
Vitesse
）
on the left side of the screen, and
switch the display every 3 seconds.
(3) Dot Matrix Display
If stop, the screen will display “OFF”. When turn on or choose”P1—P5.
The screen will display the graph of the corresponding speed.
2. Buttons:
1) START/STOP
：
Press the “START” or “STOP” to turn on or turn off the massage
2) ROG.
：
Preset program button,press the button to choose
“P-01”—“P-05”
3) SPEED - +
：
Press button to adjust the speed or parameter.With 20 sections adjustment.
3. Manual Mode
Running state: press “START” to begin as speed 1; press “+” ”-” to adjust the speed 1-15 files; press “STOP” to stop.
