54
ERROR MESSAGE & TROUBLE SHOOTING
E1: Indicates no signals picked up for 15 seconds and the monitor stops.
Solutions:
Please check all the wires if they are well connected or any connecting pins bent.
Please consult Dealer.
E2: Indicates the problems of EEPROM IC chip. Either the ID code is incorrect or the
data accessed from the IC chip is wrong.
Solutions:
Please change the monitor.(consult dealer)
E3: Indicates that VR value does not change in 5 seconds.
Solutions:
Please proceed self-checking
(press START & SPEED & SPEED at same time ).
A: Check all the wires if they are broken, damaged, or connecting pins bent.
B: Check if the fuse on incline controller was broken.
C: Change monitor or MCB, then test the machine (consult dealer)
E4 : Indicates the incline system doesn’t receive correct signals.
Solutions:
Please consult Dealer.