Abilica KH-832 D2, Manual

Page: 4 / 34

4
DELELISTE / DELLISTA / PARTS LIST
PART NO. DESCRIPTION MATERIAL SPECIFICATION
Q’TY
1 Main frame 1
2 Front stabilizer Q195 D60*500L*1.5T 1
3 Flat washer Q235A D16xD8.5x1.2T 8
4 foot cap(12angle) PP5070 D60*D75*50L 2
5 foot cap(round) PVC D60*D67*43 2
6 Curved washer Q235A D22xD8.5x1.5T 12
7 Spring washer 70# D15.4xD8.2x2T 20
8 Cap PE D38x15L 2
9 Allen bolt 35# M8x1.25x20L 12
10 Handlebar post 1
11 Pedal supporting tube 2
12L Left movable supporting tube 1
12R Right movable supporting tube 1
13 Bearing GCr15 #2203-2RS 2
14 C ring 65Mn S-40(1.80T) 2
15 end cap(half-ball) PE6070 D25.4*31L 2
16 Idle wheel NL+FIBER D44*21L 1
17 Allen bolt 35# M8*1.25*50L 4
18 Bolt 10# M5*0.8*15L 2
19 Rear stabilizer Q195 D60*1.5T*480L 1
20 Screw 35# M8*1.25*80L 4
21 Pedal ABS 30*60 2
22 Cross screw 10# ST4*1.41*15L 8
23 Protective cover ABS 100*81*40.8 1
24 Anti-loose nut 35# M10*1.25*10T 2
25 Pin ABS D6*26.5*7.7 3
26 C ring 65Mn D22.5*D18.5*1.2T 2
27 Adaptor OUTPUT
：
9VA,1300MA 1
28 Tension cable D1.5*155L 1
29 Upper computer cable 1000L 1
30 Lower computer cable 1200L 1
31 Pedal axle cover PP D46*44 2
32 Round end cap PE D45*15 2
33L Left crank welding sets 1
33R Right crank welding sets 1