52
9.
Default settings in your Control Medi
On delivery your Control Medi Multi will be set with certain default settings as follows:
Acceptance delay is set to value OFF
Feedback sound level is set to value 1 (0
– 5)
Feedback vibration level is set to value 1 (0
– 5)
Only level 1 is open, other levels are closed
GewaLink channels 16-39 are on level 1-4
A random code on the
!
button
Scanning starts on button 1, level 1
Scanning speed is set to 1.5 seconds
Maximum number of scanning cycles is set to 2
9.1 Resetting to Default settings
It is possible to reset one button, reset all buttons on one level, or reset the entire Control
Medi to default settings. See
Table 1 Default setting Gewa Link channels,
which shows you
which channels are set after a reset. Other settings will also return to default settings, see
above.
Do the following to restore:
1. First press
and then simultaneously press
3
for 2 seconds. When you release the
button
s the “Setting” alert sounds and the indication lamp on button 3 flashes.
2a. Reset
one button
:
Press
2
.
Choose the level with
.
Choose the button
X
to be restored.
or:
2b. Reset
all buttons on one level
:
Press
3
.
Choose the level with
.
Press
1
.
or:
2c. Reset to
factory settings
(all buttons on all levels):
Press
1
.
Press
1
,
2
,
3
in sequence
.
3. If the action is successful, the
“Success” alert sounds. If something goes wrong or takes
too long, the “Error” alert sounds.
Resetting to default settings
To reset one button:
Press
---
+
3
2 sec
,
2
,
choose level with
---
, then choose button
X
.
To reset one level:
Press
---
+
3
2 sec
,
3
,
then choose level with
---
,
1
.
To reset to factory settings:
Press
---
+
3
2 sec
,
1
,
1
,
2
,
3
.
---
---
---