41
2.11 Setting an acceptance delay
An acceptance delay can be set for pressing the buttons. Acceptance delay is the time a
button has to be pressed for before a function is activated. An acceptance delay can be set
from 1 to 4. 1 is no delay at all (off) and 4 is the maximum delay (1 sec.).
1. First press
and then simultaneously press
2
for 2 seconds. When you release the
buttons the
“Setting” alert sounds and the indication lamp on button 2 flashes.
2. Press
2
.
3. Press your desired value for the acceptance delay,
1
is off, and
4
is max.
4. If the action is su
ccessful, the “Success” alert sounds. If something goes wrong or takes
too long, the “Error” alert sounds.
Setting an acceptance delay
Press
---
+
2
2 sec
,
2
,
then choose the setting.
1
= 0 sec,
2
= 0.3 sec,
3
= 0.6 sec,
4
=1 sec
Default setting: Acceptance delay = OFF (0 sec)
2.12 Creating an automatic sequence (Macro)
Your Control Medi is able to send sequences of codes. When you press
one
button, Control
Medi automatically carries out what is equivalent to pressing several buttons. To find a TV
menu page for instance you need to press several buttons. Control Medi however, can be
programmed in such a way that you only need to press one button. Other available
sequences are dialling long telephone numbers or muting the TV at the same time as you
answer the telephone. Your Control Medi can also be programmed to change levels and
remember how long the button is pressed, you can transmit for a maximum of 25 seconds
per press. Other programmed sequences can also be a part of a new sequence.
A sequence can be terminated at any time by pressing any other button.
When a sequence is programmed, your Control Medi transmits at the same time what is
already on the key. A maximum of 50 button presses per sequence can be programmed.
NOTE! The button used for the sequence must not be part of the sequence.
1. First press
and then simultaneously press
1
for 2 seconds. When you release the
buttons the
“Setting” alert sounds and the indication lamp on button 1 flashes.
2. Press
4
.
3. Press
1
to start the recording.
4. Press the buttons to be used for the sequence.
5. First press
and then simultaneously press
1
. When you release the buttons the
“Setting” alert sounds and the indication lamp on button 1 flashes.
6. Press
4
.
---
---
---