Abilia All In One, User Manual, Page: 9 / 43

17 16
Pair transmitter to pager
1
To link a transmitter, press and hold the pager acknowledge button.
Release the button when the two centre diode lights start to flash.
2 Press the transmitter test button within 10 seconds to pair the units.
3
A diode light on the pager will come on to show that the transmitter is linked:
 Orange diode - Transmitter 1  Yellow diode - Transmitter 3

Green diode - Transmitter 2

Red diode - Transmitter 4
1 2 3 4
1
2
3
Repeat steps 1-3 to link a new transmitter. You can link up to 4 units.
Delete linked transmitter
1 Press and hold the pager OK button until the two centre diodes begin
to flash. Press the button three times in quick succession.
2 All the diodes will flash twice to show that the linked transmitters have
been deleted. This action cannot be cancelled.
Chapter 2 Install pager.
Activated transmitter Activated sensor Colour and flashing pattern
Transmitter 1 Sensor 1 Orange
Transmitter 1 Sensor 2 Green
Transmitter 1 Sensor 3 Yellow
Transmitter 1 Wireless alarm unit Red
Transmitter 1 Test button Red
Activated transmitter Activated sensor Colour and flashing pattern
Transmitter 1 Sensor 1 Orange
Transmitter 1 Sensor 2 Orange
Transmitter 1 Sensor 3 Orange
Transmitter 1 Wireless alarm unit Orange
Transmitter 1 Test button Orange
Transmitter 2 Sensor 1 Green
Transmitter 2 Sensor 2 Green
Transmitter 2 Sensor 3 Green
Transmitter 2 Wireless alarm unit Green
Transmitter 2 Test button Green
Transmitter 3 Sensor 1 Yellow
Transmitter 3 Sensor 2 Yellow
Transmitter 3 Sensor 3 Yellow
Transmitter 3 Wireless alarm unit Yellow
Transmitter 3 Test button Yellow
Transmitter 4 Sensor 1 Red
Transmitter 4 Sensor 2 Red
Transmitter 4 Sensor 3 Red
Transmitter 4 Wireless alarm unit Red
Transmitter 4 Test button Red
Key to pager signals
The pager shows which sensor and transmitter has activated by using various
diode colours and flashing patterns.
Note: The pager diode colours and flashing pattern differ depending on
whether you have
ONE
or
SEVERAL
transmitters linked to the system.
System with ONE transmitter - Each sensor has a dedicated diode colour
System with - Each transmitter has a dedicated diode colour
SEVERAL transmitters - Sensors are identified by flashing pattern
Chapter 2 Install pager.
1
2
EN