Abilia All In One, User Manual, Page: 8 / 43

15 14
Transmitter
error
No coverage
Sound On/Off
Low pager
battery
Acknowledge
button
Charging indicator
Bed vibrator
test button
Power
indicator
Bed vibrator
outlet
Bed vibrator
(accessory)
Replaceable
label
Sensor 1
Transmitter 1
Sensor 2
Transmitter 2
Sensor 3
Transmitter 3
Wireless alarm and test button
Transmitter 4
Chapter 2 Install pager.
Overview of pager and charger
”click”
1
2
Chapter 2 Install pager.
How to use the pager
When a sensor is activated, the pager will sound and vibrate. The diode col-
our and flashing pattern shows which transmitter/sensor has been activated.
If you want to Do this
Switch off the pager alarm • Press the pager Acknowledge button.
Mute the alarm • Push the pager Sound switch up/down.
Switch the pager on/off • Push the pager On/Off switch right/left.
EN
Install pager
1 Pull out the battery tab on the pager and charger to start the units.
2 Plug the charger into a mains socket. The power LED will light up to
show that it is connected. Place the pager in the charger and check that
it clicks into place. The charging LED will blink/light up to show that
it’s charging.
Note: Remember to charge the pager for 6 hours before using it for the first
time. When fully charged, the charging LED will turn off.