Abicor Binzel xFUME FLEX, Operating Instructions Manual, Page: 24 / 92

EN - 2
BAL.0733.0 • 2021-01-11
xFUME FLEX
EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners worldwide
can be found on our website at www.binzel-abicor.com
1 Identification EN-3
1.1 Marking EN-3
1.2 EU declaration of conformity EN-3
2 Safety EN-4
2.1 Designated use EN-4
2.2 Classification of the warnings EN-4
2.3 Obligations of the operator EN-4
2.3.1 Country-specific obligations of the operator EN-5
2.4 Specific safety instructions EN-5
2.5 Safety instructions for the mains connection EN-5
2.6 Personal protective equipment (PPE) EN-5
2.7 Warning and notice signs EN-6
2.8 Emergency information EN-6
3 Product description EN-6
3.1 Technical data EN-6
3.1.1 Fume extraction system EN-6
3.2 Nameplate EN-7
3.3 Signs and symbols used EN-7
4 Scope of delivery EN-7
4.1 Transport EN-8
4.2 Storage EN-8
5 Functional description EN-8
6 Commissioning EN-9
6.1 Transport and installation EN-9
6.2 Mounting the extraction arm EN-10
6.3 Establishing the electrical connection EN-13
6.4 Controlling the volume flow EN-13
7 Operation EN-14
7.1 Control elements EN-15
8 Decommissioning EN-15
9 Maintenance and cleaning EN-16
9.1 Inspection/service intervals EN-17
9.2 Pre-filter EN-18
9.2.1 Replacing the filter pad EN-18
9.3 Primary filter EN-19
9.3.1 Replacing the primary filter EN-19
9.4 Cleaning outer surfaces EN-19
9.5 Replacing the extraction arm EN-20
10 Troubleshooting EN-21
11 Disassembly EN-22
12 Disposal EN-23
12.1 Welding dust EN-23
12.2 Materials EN-23
12.3 Consumables EN-23
12.4 Packaging EN-23
13 Anhang/Appendix/Annexes/Anexo
13.1 Schaltplan/Circuit diagram/Schéma de connexion/
Esquema de conexiones