BAL.0374.0 • 2019-04-01
EN - 25
ROBO Compact W600
11 Disassembly
11 Disassembly
Disassemble the following:
1
Compl. cable assembly from wire feeder.
2
Torch neck from robot connection.
3
Parts to be disconnected.
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect the coolant supply and return hoses.
• Disconnect all electrical connections.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Note the following instructions:
