Abicor Binzel MF1-Rear, Operating Instructions Manual

Page: 28 / 76

EN - 10
6 Putting into operation MF1 rear
6.1.1 Mounting the pressure rolls
1 Lift off the cover (5) .
2
Press on the rocker
(10)
then rotate the eccentric bolt
(1)
and remove it upwards.
3 Unscrew the knurled screw (6) and lift off the rocker (10) .
4
Loosen the knurled screws
(7)
and press out the axle
(9)
downward.
5 Remove the drive gears (11) .
6
Place the feed rolls
(12)
on the drive gears
(11)
.
7 Insert the drive gears (11) and axles (9) and secure in place using knurled screws (7) .
8
Place the rocker
(10)
on the bolt and secure with the knurled screw
(6)
.
9 Swivel the rocker (10) into position, insert the eccentric bolt (1) and turn it over.
10 Put on the cover (5) .
1 Eccentric bolt
2 Drive gears x 2
3 Knurled screws x 2
4 Feeder drive rolls x 2
5 Cover
6 Knurled screw
7 Knurled screws x 2
8 Pressure screw
9 Axles x 2
10 Rocker
11 Drive gears x 2
12 Feeder pressure rolls x 2
Fig. 2 Mounting the feed rolls
1 2 4 3
8
8 9
12
6
11
10 7
5