Abicor Binzel iCAT mini, Operating Instructions Manual

Page: 64 / 148

EN - 30 BAL.0361.0 • 2021-02-25
9 Maintenance and cleaning iCAT mini
9.1.4 Cleaning iCAT mini with ABIROB
®
W (iCAT mini with wire brake)
We recommend cleaning the iCAT mini with wire brake and welding torch neck
ABIROB
®
W 1–2 times weekly.
1 Disassemble the welding torch (1) and neckliner.
2 Remove the protective cap (2) .
3 Remove the compressed air hose (3) from the wire brake (6) .
4 Unscrew the wire brake (6) .
5 Remove the bellows (4) .
6 Clean exposed parts with compressed air.
7 Check the wire brake (6) for proper functioning and clean as needed.
8 Remount the bellows (4) , wire brake (6) and protective cap (2) .
9 Mount the welding torch (1) and neckliner.
10 Connect the compressed air hose (3) to the wire brake (6) .
1 Welding torch ABIROB
®
W
2 Protective cap
3 Compressed air hose
4 Bellows
5 iCAT mini
6 Wire brake
Fig. 18 Cleaning – iCAT mini with wire brake and welding torch neck ABIROB
®
W
1
2
3
4
5
6