Abicor Binzel iCAT mini, Operating Instructions Manual

Page: 57 / 148

BAL.0361.0 • 2021-02-25 EN - 23
iCAT mini 6 Commissioning
6 Put the protective cap (1) back on.
6.5.3 Mounting the welding torch neck ABIROB
®
W
1 Equip the welding torch neck ABIROB
®
W (1) with tip adaptor, contact tip, and
gas nozzle.
2 Insert the positioning pin (2) in the hole (4) at the welding torch/cable assembly
interface (3) . The welding torch neck ABIROB
®
W (1) may be attached in this
position only.
3 Using the connection nut (5) , screw the welding torch neck ABIROB
®
W (1) to the welding
torch/cable assembly interface (3) .
NOTICE
• Do not tighten the cylinder head screw (8) without a mounted welding torch.
NOTICE
• Check all connections and sealing rings regularly for damage and to ensure they are
secure. Replace as needed.
• Consult the documentation for the welding components.
1 Welding torch neck
ABIROB
®
W
2 Positioning pin for
torch orientation
3 Welding torch/
cable assembly
interface 4 Hole for
positioning pin for
torch orientation 5 Connection nut for
welding torch
Fig. 12 Mounting the welding torch neck ABIROB
®
W
1 2 3 4
5