Abicor Binzel iCAT mini, Operating Instructions Manual

Page: 55 / 148

BAL.0361.0 • 2021-02-25 EN - 21
iCAT mini 6 Commissioning
6.5 Mounting the welding torch neck
6.5.1 Mounting the welding torch neck ABIROB
®
G
1 Equip the welding torch neck ABIROB
®
G (2) with tip adaptor, contact tip, and gas nozzle.
2 Loosen the cylinder head screw (6) .
3 Mount the welding torch neck ABIROB
®
G (2) in the welding torch/cable assembly
interface (3) . The welding torch must be inserted all the way into the welding torch/cable
assembly interface (3) .
4 Tighten the cylinder head screw (SW4) with a max. tightening torque of M=6 Nm
to fix the welding torch.
5 Put the protective cap (1) back on.
1
Protective cap
2 Welding torch neck
ABIROB
®
G
3
Welding torch/cable
assembly interface
4 iCAT mini
5
Bellows
6 Cylinder head screw
M5 × 16
Fig. 10 Mounting the welding torch neck ABIROB
®
G
NOTICE
• Do not tighten the cylinder head screw (6) without a mounted welding torch.
5 6
1
2 3
4