7
Setting the Gas Flow Pressure
1. Disconnect Power Supply
2. Reconnect power supply while pressing the ON/OFF
button. The EWR is now in setup mode for pressure.
3. Press the plus (+) or (-) button to adjust the outgoing
pressure. The first illuminated LED indicates that the
EWR is in pressure mode. Each additional illuminated
LED represents 0.2bar of pressure; i.e. 3 LEDs =
0.4bar, 6 LEDs = 1.0bar, or 11 LEDs = 2.0bar.
4. Press and hold the ON/OFF button until the lights
make a quick flash. The flash confirms the new setting
is saved, and the EWR returns to normal mode of
operation.
APPENDIX: BINZEL EWR Part Numbers
Part Number
Items and Description
514.1005
Measuring Shunt 150A 1.5m for EWR Basic/PRO
514.1006
Measuring Shunt 300A 3m for EWR Basic/PRO
514.1007
Measuring Shunt 500A 5m for EWR Basic/PRO
514.1008
Holder for EWR Basic/PRO/TIG
514.1009
Transport Case for Welding Monitor
514.1019
EWR Basic Complete Package (500A/5m)
514.1020
EWR PRO Complete Package (500A/5m)
514.0143
EWR Splitter for EWR PRO (MIG/MAG)
