EN - 8
6 Putting into operation
AUT-WIG
6.1 Equipping the TIG welding torches
6.1.1 AUT-WIG 20G/400W
1
Unscrew retaining nut
from guide tube
2
Insert collet
and secure it with the retaining nut
.
3
Screw guide tube
into torch body
.
4
Screw gas diffuser
into torch body
5
Insert the tungsten electrode
into the torch body
from the front.
6
Screw gas nozzle
7
Set tungsten electrode
to the required length and fasten it to the guide
NOTE
• TIG welding torches may only be put into operation by trained
personnel.
CAUTION
Risk of injury
Puncture caused by sharpened electrode tip.
• Do not reach into the danger zone.
• Wear protective gloves.
1
Gas nozzle
2
Gas diffuser
3
Torch body
4
Guide tube
5
Collet
6
Retaining nut
7
Tungsten electrode
Fig. 1
Equipping the 20G/400W
1
2
3
4
5
6
7
Summary of Contents for Aut-Wig
