Abicor Binzel AUT-WIG 20G, Operating Instructions Manual

Page: 27 / 76

BAL.0166 • 2019-01-03 EN - 9
AUT-WIG 6 Putting into operation
6.1.1 AUT-WIG 20G/400W
1 Unscrew retaining nut (6) from guide tube (4) .
2 Insert collet (5) into guide tube (4) and secure it with the retaining nut (6) .
3 Screw guide tube (4) into torch body (3) .
4 Screw gas diffuser (2) into torch body (3) .
5 Insert the tungsten electrode (7) into the torch body (3) from the front.
6 Screw gas nozzle (1) onto gas diffuser (2) .
7 Set tungsten electrode (7) to the required length and fasten it to the guide tube (4) .
6.1.2 AUT-WIG 200W
1 Screw collet (4) with gas diffuser (2) into torch body.
2 Insert the tungsten electrode (5) into the torch body (3) from the front and tighten it with the
gas diffuser (2) .
3 Screw gas nozzle (1) onto gas diffuser (2) .
6.2 Tungsten electrode
The electrode type is set by EN ISO 6848. The max. length of electrode depends on the type
of torch.

3.1 Technical Data on page EN-5
1 Gas nozzle
2 Gas diffuser
3 Torch body
4 Guide tube
5 Collet
6 Retaining nut
7 Tungsten electrode
Fig. 1 Equipping the 20G/400W
1 2 3 4
5 6 7
1 Gas nozzle
2 Gas diffuser
3 Torch body
4 Collet
5 Tungsten electrode
Fig. 2
Equipping the AUT-WIG 200W
1 2
3
4 5