EN - 3
ABITIG
®
Little
1 Designated Use
1 Designated Use
The TIG welding torch of the
ABITIG
®
Little
range are used in industry and
in the trade for inert gas welding using tungsten electrodes and inert gases. It
consists of the torch neck with equipment parts and wearing parts, handle and
cable assembly with central connector. The TIG manual torch corresponds to
EN 60 974-7 and is not a device having its own function. Arc welding can only
be carried out in connection with a welding power supply.
1.1 Technical Data
Welding
- 10 °C to + 40 °C
Transport and storage
- 10 °C to + 55°C
Relative humidity
up to 90 % at 20 °C
Tab. 1
Ambient temperature
Type of voltage
DC or AC
DC polarity of the electrodes
Usually negative
Type of use
manual
Voltage rating
113 V peak value
Max. arc inflammability and stabilization voltage
Breakdown voltage 50 Hz
8 kV
Protection type of the machine-side connections
IP3X (EN 60 529)
Shielding gas
as per DIN EN ISO 14175
Electrode
Tungsten electrodes suitable for TIG
use, preferably low-radiation
Tab. 2
General torch data (EN 60 974-7)
Switching voltage of trigger
0.02 - 42 V (DC and AC)
Switching current of trigger
0.01 - 100 mA
Switching power of trigger
max. 1 W (resistive load)
Tab. 3
Electrical control devices
