EN - 11
ABITIG
®
WH
6 Putting into operation
6.3 Connecting the TIG welding torch
1
Plug the cable assembly connection into the power supply and secure it with
a connection nut.
6.4 Mounting the TIG welding torch system on the robot
1
Fasten the torch clamp
on the cylindrical shaft end of the insulating
jacket
2
Mount the torch clamp
with the screw
, the disc
to the
ABICOR BINZEL
CAT torch mount
For proper mounting of the CAT
ABICOR BINZEL
torch mount, please
observe the relevant operating instructions.
NOTE
• The welding performance is affected by the selection of the tungsten
electrode and by wear. A smooth, groove-free sharpened end of the
tungsten electrode has a positive effect on the welding result.
1
Torch clamp
2
Screw
3
Insulating jacket
4
Screw
5
ABICOR BINZEL
CAT torch
mount
6
Disc
7
Nut
Fig. 3
Mounting the TIG welding torch system on the robot
1
3
2
7
5
4
6