DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
INSTALLATION GUIDE
Note: This product must be installed by a licensed plumber.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with AS/NZS 3500.
R Y L A S H O W E R R A I L
I N S T A L L A T I O N M A N U A L
1
4
5
6
2
3
Measure & mark desired position of the
rail on the wall
Measure centre to centre, brass
fixing holes in rail
Measur
e
Remove all brass mountings with the
supplied allen key
Screw the brass mountings into the plugs
Fit shower rail onto the brass mountings to
wall using the allen key
For best result in fixing shower rail, fit or install timber noggen in wall at the ‘Rough In’ stage
1x Ryla shower rail
G r u b S c r e w
S c r e w
I N T H E B O X
Drill holes with masonry drill bit
(not on hammer) & fit the plugs using a
rubber mallet
B r a s s M o u n t i n g
B r a c k e t
P l u g
2x Plugs
1x Allen key
2x Screws
