background image

Elite Hydraulic Spreader Setup Guide 

ABI

(Absolute Innovations, Inc.)         -          

855-211-0598        -           www.abisupport.com

         Page | 4  

 

Operational Safety Rules:

  

Please exercise caution at all times when setting up, operating, or performing 

maintenance on the Elite Spreader. Remember, any piece of equipment like 

the Elite Spreader can cause injury/damage if operated improperly or if the 

user does not understand how to operate the equipment. Exercise caution at 
all times with using the Elite Spreader. 

 

Never permit any person to ride or board the ELITE SPREADER at any time. 

NEVER ALLOW 

RIDERS ON THE ELITE SPREADER! 

 

Use care and maintain minimum ground speed when operating the ELITE SPREADER on a 
hillside, or when operating close to ditches, fences, or water sources. 

 

Never place any body part under the while the ELITE SPREADER is in operation. 

 

Never allow anyone near the ELITE SPREADER while in operation. 

 

Operate the ELITE SPREADER in the daylight or under good artificial light. Operator should 
always be able to clearly see where they are going. 

 

Be alert for hidden hazards. Always operate the ELITE SPREADER with caution over work 
environments that may have buried obstacles. 

 

Stay well and clear of all moving parts. Keep all limbs clear of attachments when making 
adjustments with all hydraulically operated attachments. 

 

Use caution when operating the ELITE SPREADER in icy, wet, or snowy condition. 

 

Do not use the ELITE SPREADER on highways or public thoroughfares. The ELITE SPREADER is 
designed for off road use only. 

 

Always follow Tractor Manufacturer’s rules for safe Operation of Tractor, and for proper 
procedures for attaching and disconnecting attachments. Contact your local dealership for 
an Owner’s Manual for any questions related to the safe operation of the Tractor. 

Use caution when operating the ELITE SPREADER. Using the ELITE SPREADER 

outside of stated safety and operations guidelines may result in injury to operator or 
others, property damage, or a void in warranty.  

 

Please  read  this  entire  manual  before  operating.  Failure  to  follow  the 

instructions  outlined  in  this  manual  may  result  in  personal  injury  and/or 
damaged equipment, and could void the warranty. 

 

Serial Number Location - 

 

The spreader’s serial number can be found on the back right frame rail behind the 

right tire. 
 

 

 

All pictures and instructions in this manual assume that the right and left sides 

of the spreader are that of someone standing behind the unit facing forward.

  

 

Summary of Contents for 3H


















Reviews: